How To Repair Fiberglass Tent Poles

How To Fix Broken Fibreglass Tent Poles

Admittedly, It isn't the best news, but y'all don't demand to cancel that camping holiday just even so. And you lot definitely don't have to shell out for a new tent.

All you need is some replacement tent poles and a little know-how – and your tent poles will be equally practiced as new. Read on for our quick and easy guide on how to gear up broken fibreglass tent poles…

A set of replacement fibreglass tent poles. If you're unsure, opt for universal tent poles.
A small hacksaw.
Sandpaper.
Duct record.

Your pole is fabricated up of several loose 'sections' and an elasticated cord (sometimes referred to as a shock string). The shock cord runs from one end to the other, through each section, and is but knotted at either end.

Mensurate the section which is to exist replaced (the new department is by and large actress-long, so you lot may demand to cure the new pole downwardly to conform).

Cut the new section (if needed) to the length of the pole you volition exist replacing using a minor hacksaw. A adept tip here is to put duct tape just earlier where you will be sawing to concur the pole in place and prevent splinters. Then remove the duct tape and sand around the edges until smooth.

Next, lie your total pole section out on the floor and brainstorm to untie (or cutting) the knot at one of the ends – remembering to keep a hold of the shock cord.

Hold onto the shock cord and remove the sections 1 at a time (keeping them in order) until y'all reach the section that needs to exist replaced.

Lastly, notwithstanding property onto the daze cord, re-thread the cord dorsum through the sections you have temporarily removed it from and tie a large knot at the terminate – ensuring the cord is fairly taught.

You tin can always change the shock cord length at whatever time by fishing out the knot in one of the terminate poles.